Copyright Silca 2006 29
Operating Manual - English SBB
ERROR MESSAGE 16
- The Body computer (main control unit) is not properly programmed; programming operations cannot be
carried out.
- Have the body computer properly programmed by an authorized dealer, then proceed with programming.
- Press any key to continue.
ERROR MESSAGE 17
The remote control to be programmed is not the right one or is faulty.
- Repeat programming, making sure that the remote control is the right one and operational.
- Press any key to continue.
ERROR MESSAGE 18
The battery in the remote control to be programmed is flat.
- Replace the remote control battery with a new one and repeat programming.
- Press any key to continue.
ERROR MESSAGE 19
The remote control to be programmed is already in the memory and operational.
- Use a remote control not yet programmed and repeat programming.
- Press any key to continue.
- PROG. NEW KEYS -
Body Computer
not properly
programmed
Press any key...
- RKE PROGRAM -
REMOTE CONTROL N° XX
Learning failed
Detective rem.control
Repeat the procedure
Press any key...
- RKE PROGRAM -
REMOTE CONTROL N° XX
Learning failed
Run-down battery
Repeat the procedure
Press any key...
- RKE PROGRAM -
REMOTE CONTROL N° XX
Learning failed
Rem.ctrl alr. acquired
Repeat the procedure
Press any key...
To Next Page
Loading...