SilentWind MPPT HYBRID BOOST CHARGE CONTROLLER User Manual

MPPT Charge Controller User Manual - Feb. 2019 13
3.7 LOAD OUTPUT MODES
Load output modes optional that can be set on the LCD display or software
V1
Light control on / off
V2
Light control on, time control off
V3
Light control on/off, time half power
V4
Light control on, time half power, time
control off
V5
Constant On
V6
Constant Off
V7
Constant half power
4. SAFETY PRECAUTIONS
Our primary concern when we developed the Hybrid Boost Charge Controller was your safety. The
information provided is to ensure your safety during installation, operation, and in case of trouble.
Avoid using the Hybrid Boost Charge Controller in direct sunlight, sun exposure, rain, humidity,
acid fog and dust.
Do not use the Hybrid Boost Charge Controller in a place where has flammability and explosive
gas/articles. Beware of flames and sparks.
If you have any additional questions please contact us.
Please keep in mind that liquid acid batteries can emit dangerous explosive gas. If the
place where the Hybrid Boost Charge Controller is installed is close to this kind of
batteries, unsure that has efficient ventilation.
WHEN WORKING IN THE SYSTEM:
1
st
Disconnect the Silentwind generator (to avoid risks, once you remove the 3 wires
from the generator, please put at least 2 wires from the generator together to cause
a short circuit and slow down the rotation of the blades).
2
nd
Disconnect the solar panels if available.
3
rd
Disconnect Battery. This is very important. Otherwise the Hybrid Boost Charge
Controller will be damaged.

SilentWind MPPT HYBRID BOOST CHARGE CONTROLLER Specifications

General

Brand	SilentWind
Model	MPPT HYBRID BOOST CHARGE CONTROLLER
Category	Controller
Language	English