SilentWind MPPT HYBRID BOOST CHARGE CONTROLLER User Manual

MPPT Charge Controller User Manual - Feb. 2019 28
8. TROUBLESHOTTING
8.1 No display on LCD
Description
Possible reasons and solutions
The connection between the battery and the
controller is not tight.
Check the wiring and reconnect it.
Description
Possible reasons and solutions
DC breaker is not on between battery and
controller.
Turn on the breaker.
Description
Possible reasons and solutions
Low battery voltage.
- The system parameters are not matched
correctly. Recheck the label and
parameters on the machine.
- The battery does not work. Change for a
new one.
Description
Possible reasons and solutions
The battery is connected negatively to the
controller.
Need change the internal fuse in controller
and reconnect to the battery.
8.2 No output
Description
Possible reasons and solutions
Flicker means overload.
Check if the load connection is normal.
Remove the over load, press the set button
on the load interface to recover output.
Description
Possible reasons and solutions
Load short circuit.
Check the load and press the set button on
the load interface to recover output.

SilentWind MPPT HYBRID BOOST CHARGE CONTROLLER Specifications

General

Brand	SilentWind
Model	MPPT HYBRID BOOST CHARGE CONTROLLER
Category	Controller
Language	English