SilentWind MPPT HYBRID BOOST CHARGE CONTROLLER User Manual

MPPT Charge Controller User Manual - Feb. 2019 23
See the following table for specific parameter setting.
Scroll down to the display you want and press for 2s to go to the desired settings.
After setting the parameters, press for 2s to leave the SET mode.
Settings
Interface Introduction
Display Interface
End of charge voltage
Battery Voltage
Over-voltage
Wind turbine Voltage
Storm Brake
Wind turbine current
Do not change !!!
Wind turbine power
Low-wind boost
Solar panel voltage
Not enabled
Solar panel current
Under voltage switch-off
Load 1 current
Under voltage recovery
Load 2 current
8 output control modes
Load 1 output mode
Do not change !!!
Wind turbine power
Night voltage point
Light control on voltage
Day voltage point
Light control off voltage
Time control duration
Load 2 control off time

SilentWind MPPT HYBRID BOOST CHARGE CONTROLLER Specifications

General

Brand	SilentWind
Model	MPPT HYBRID BOOST CHARGE CONTROLLER
Category	Controller
Language	English