20
422348-Evolution ST350-Instruction manual-usa-rev01_AN
D – How to adjust your device settings?
THE HAIR RESISTS
Several steps to take successively (not all, but follow the recommended order)
Use of the basic criteria configured in the device
Increase in intensity between 2 and 4 points
Increased HF current passage time
Change in hair size (switch needle if necessary)
Needle size change (larger size)
Select curly mode (according to area)
Double the pulse (repetition) > programming device or pedal (adjusting the technique of applying the needle in the
follicle),
Blend mode selection and needle adjustment accordingly (depending on hair size > from medium).
THE HAIR STICKS TO THE NEEDLE
Do the opposite of the description above > the intensity is far too strong.
CAUTION: the definitive electric hair removal device EVOLUTION ST350 is dependent operator and training
dependent.
Its use is subject to specific vocational training at the Silhouet-Tone training centres.
The company Silhouet-Tone declines any responsibility in the framework or the basic training in final electrical hair
removal would not be followed by the technician.
The same applies to the Thermocoagulation technique.
To Next Page
Loading...