- English
. EU declaration of conformity
The manufacturer hereby declares that this appliance complies with the funda-
mental requirements and the other relevant provisions of:
• EMC Directive //EU
• Low Voltage Directive //EU
• Ecodesign Directive //EC
• RoHS Directive //EU.
. Before using the appliance for the fi rst time
Remove all packaging materials.
Before using for the first time, rinse the accessories thoroughly with warm water and
washing-up liquid. Dry everything thoroughly.
Place the appliance on a stable, level surface.
WARNING!
Risk of injury!
There is a risk of injury due to moving and sharp parts.
Take care when handling the sharp edges of the blade
().
Always unplug the mains plug before installing and re-
moving accessory parts.
. Operating the appliance
.. Assembling the mincer
Depending on the desired result, use one of the three perforated discs (//) and the
blade () to process meat.
To completely disconnect the mincer from
the power supply, unplug the plug from
the power socket.
Insert the mincer attachment () into the
connection opening with the bayonet lock
().
At this point, the mincer filling opening
points to the right.
Fig.
To Next Page
Loading...
Need help?
General
