EasyManua.ls Logo

Silvercrest SFW 800 A1 - Storing;Transporting

Silvercrest SFW 800 A1
199 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English - 
Problem Possible cause Solution
The overheating protection
has been triggered.
Switch off the appliance.
Unplug the mains plug.
Allow the appliance to
cool down for approx. 
minutes.
Plug in the mains plug
again.
Switch the appliance on
again.
The overheating protection
triggers too frequently.
Contact customer services.
. Storing/transporting
When you are not using the appliance, unplug the mains plug, remove and clean the
appliance as described in section “. Removing accessories” on page and sec-
tion “. Cleaning the appliance” on page.
Wind the cable around the cable spool ()
as shown in Figure  on the underside of
the appliance and guide the end of the ca-
ble through the side cable ducting ().
Fig. 
Store the perforated discs (//), the sausage stuffer ring (), the sausage at-
tachments (//), the kibbeh ring () and the kibbeh attachment () in the disc
storage ().
Store the appliance in a dry, frost-free place, away from direct sunlight.
Store the appliance out of the reach of children.
To avoid damage during transport, we recommend that you use the original packag-
ing.

Table of Contents

Related product manuals