SRP9100 ~ PMR Portable Radio User Guide
TNM-U-E-0047 Issue 1.2a Page 18 © Comgroup Australia 2010
selected or if the Scan Channel is re-selected. The Priority Channel cannot
be skipped.
Scan groups may be assigned as user scan groups using the field
programmer. There may be up to 4 user scan groups.
If a scan group is assigned as a user scan type, the user is able to edit the
channels in the scan group from the keypad [only available on keypad
version].
The user can then enter the edit submenu for that group be pressing the * key.
Editing is described in the next section.
While listening on the channel, the User can PTT on that channel. After the
signal disappears the radio will remain listening on the channel for a short time
before resuming scanning.
The Keypad may be used for quick channel change (e.g. 456#) while the radio
is scanning.
5.5.2 Scan-Edit Screen
[keypad version only].
If the current channel is a scan channel and that scan channel has been
assigned as a user editable scan channel, it may be edited by pressing the *
key. The sub menu screen is shown below.
502
0Del 1Ad 2 Pr
Scan Channel Number
User Scan Sub Menu
The scan edit sub menu shows the keys that are available to modify the scan
group.
To delete a channel from the scan group, press 0 followed by the channel to
delete and then #. To delete channel 14, press 014#. The display will briefly
show “deleted” and return to scan mode.
To Next Page
Loading...
Need help?
General
