SRP9100 ~ PMR Portable Radio User Guide
© Comgroup Australia 2010 1 TNM-U-E-0047 Issue 1.2a
1. INTRODUCTION
1.1 O
VERVIEW
The SRP9100 Series Radios are versatile Digital Signal Processor (DSP)
controlled, two-way portable radios. The SRP9100 Series is available in a
number of frequency bands and versions for specific applications. This
manual describes the operation of the SRP9130 PMR model with a 12 key
keypad and SRP9120 PMR without numeric keypad.
The radio is software programmable and it can be customised to the
operational requirements of your particular fleet. Your Simoco representative
can help in programming your radio facilities to meet your present and future
requirements.
A wide range of accessories is available to complement the SRP9100 series
radios, including chargers, antenna, headsets, covert kits, holsters and carry
cases. Refer to Simoco for comprehensive descriptions.
This guide describes the facilities that are currently available and can be
programmed into the PMR mode of the SRP9100.
1.2 C
ONFIGURATION
Before you can use the SRP9100, it must be configured using the Field
Personality Programmer (FPP). The configuration process loads the
customised radio channels, signalling and user options so that the radio will
operate with your system.
Although this manual defines the configuration and use of the PMR mode, the
radio can be configured easily to trunk mode using the FPP.
To Next Page
Loading...
Need help?
General
