14 simon.es/simon100 INSTALATION AND CONFIGURATION GUIDE
Simon | 100
HUB iO CONNECTION METHOD
Once the first HUB iO connection has been done, you must click "Finish" to complete the installation
The following screen will allow us to activate the remote access, for which, if you click on "Yes" you will
request the data of your Wi-Fi connection to connect the HUB iO directly to your Router and allow access from
anywhere with your device Smart and the Simon100iO app.
In case you do not have Internet or want to do it later, click on "No". Note that remote access from outside the
home will not be possible until you link the HUB iO to your router with Internet but you can use all its
mechanisms and interact from the app before connecting to the Wi-Fi of the HUB iO. Be guided by the app:
IMPORTANT NOTE
If you set the HUB iO working in Access Point mode, all data regarding to Installation details will not be
uploaded until Simon 100 iO APP detects that your Smartphone/Tablet gets connected to Internet and APP.
Please ensure to close your session once installation changes are done, Simon 100 iO APP will request to get
connected to internet in order to upload your installation details.
To Next Page
Loading...
Need help?
General