Simon 100 iO User Manual

INSTALATION AND CONFIGURATION GUIDE simon.es/simon100 43
Simon | 100
COMMAND_CLASS_MULTICHANNEL
- MULTICHANNEL_ENDPOINT_GET  Sent when an added device has Multichannel capabilities in order to
know the device points.
- MULTICHANNEL_ENDPOINT_GET  Sent when an added device has Multichannel capabilities in order to
know the device points.
- MULTICHANNEL_CAPABILITIY_GET  Sent when an added device has Multichannel capabilities in order to
know each channel capabilities and manage them properly.
- MULTICHANNEL_COMMAND_ENCAP  Used to encapsulate commands addressed to device channels.
COMMAND_CLASS_VERSION
- VERSION_COMMAND_CLASS_GET  Sent when an added device has Multichannel capabilities in order to
ask the device points.
COMMAND_CLASS_WAKE_UP
- WAKE_UP_INTERVAL_GET  When you add a device that supports COMMAND_CLASS_WAKE_UP, HUB iO
will send this command in order to request the supported attributes of this command class.
- WAKE_UP_INTERVAL_SET  After receive the ZW_WAKE_UP_INTERVAL_REPORT, HUB iO will configure the
Wake Up attributes with default time and setting the HUB iO as node to be reported.
- WAKE_UP_NO_MORE_INFORMATION  After Wake up notification Hub iO will perform pending actions
over it and send the battery device to Sleep sending WAKE_UP_NO_MORE_INFORMATION. Pending actions
can be Basic Get or Basic Set.

Simon 100 iO Specifications

General

Brand	Simon
Model	100 iO
Category	Home Automation
Language	English