30
4007ES Operator’s Manual (579-1165)
Active List:
Tap the Active List button to access the Print Active List screen, where the Install Mode button can be used to
generate a report containing the following Install Mode list information:
• Point ID
• Custom Label
• Device Status
Verification Tally:
Tap the Verification Tally button to generate a report containing the following information for each device supporting the
alarm verification:
• Device Number
• Custom Label
• Device Type
• Point Type
• Tally Count
TrueAlert Self-Test:
Tap the TrueAlert Self-Test button to access the Print TA Self-Test screen to generate a report containing the Self-Test
results for the TrueAlert appliances. Tap the ALL button to generate a report with the results for all appliances. Tap the
LAST button to generate a report with result for the last device.
Report Menu, Continued
To Next Page
Loading...
