Simplex 4100U-S1 - Typical Panel Layout; Overview

1-2
The 4100U-S1 is supplied with an Operator Interface plus one Expansion Bay in a 21U sized
cabinet.
The Zone Isolate modules are fitted into the Expansion bays from left to right. The first zone
is at the top of the leftmost module.
Typical Panel Layout
Overview
Figure 1-1. Zone detail
Emergency Operating Instructions
SYSTEM IS NORMAL
08:23:43 am MON 11 -DEC-00
Fire Control
Figure 1-1. Typical Panel Layout
Operator Interface
A
lphanumeric display, Keypad,
Acknowledge & Control Keys.
Zone Isolate Modules
Red LED indicates alarm,
Yellow LED indicates isolation,
Pushbutton isolates & de-isolates
Ancillary
Controls
These are optional,
panel (site) specific
controls
Isolate
Pushbutton
Red Alarm
LED
Y
ellow
Isolate
LED