Simplex 4100U-S1 - Summary of Display-Only Attributes

6-3
Category Attribute Description
Present sensitivity selected Displays the current sensitivity of the device.
Average value Displays the average value recorded by the sensor.
Alarm value Displays the value required to trigger an alarm.
Current value (per cent of
alarm)
Displays the current (real time) value.
TrueAlarm
Sensors Only
(smoke, heat,
VESDA or 4-
20mA)
Peak value (per cent of
Alarm)
Displays the maximum value reported by the device as a
percentage. Note that this is the maximum value reported
since the last time this counter was cleared.
Display-Only Attributes, Continued
Summary of Display-
Only Attributes,
(continued)
Table 6-2. Display-Only Attributes (continued)