1-7
The 4100U-S1 operator interface panel shows the following under normal conditions.
• Green AC Power LED is ON – indicating the panel is receiving AC Power.
• All other LEDs off.
• Alphanumeric display reports that the system is normal and shows the current time
and date, as shown below.
Note: If the appearance of the operator interface is not as shown
above, refer to the information in Chapters 2 and 3 for instructions
on managing the alarm, fault, or isolate condition.
Normal Appearance of Operator Interface
Description
SYSTEM IS NORMAL
08:23:45 MON 18-SEPT-00
To Next Page
Loading...
