Installation
20221586B 39
2.22 User Set-up Menu
In the AP26 and AP27, all modes except NFU and FU have a
complemental User Set-up menu. You can easily access the set-
up menu by a quick double press on the NAV/WIND/SETUP
button.
Quick double press
to access
Scroll through the menu
Use the course knob to
change a value or a setting
Alternating Course Knob Icon
When the course knob is used in the User Set-up menu, an icon
will alternate with the mode index to tell that no course changes
can be made unless you press the mode button.
The user set-up menu times out 30 seconds after the last
operation in the menu.
STANDBY Mode
Backlight
The backlight of the display and buttons may be
adjusted to 10 levels (10 = brightest). The setting is
stored when the system is turned off. Adjustment is
local to the control unit you adjust or synchronized
with other units in the Simrad Group (page 110).
Contrast
The contrast of the display may be adjusted to 10
levels (10 = highest contrast). The setting is stored
when the system is turned off.
Adjustment is local to the control unit you adjust. At
high temperatures, not all levels are available due to
automatic temperature compensation.
To Next Page
Loading...
Need help?
General
