EasyManuals Logo

Simrad AP28 Installation Manual

Simrad AP28
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
Technical specifications | 47
Vibration resistance (according to IEC 68-2-6):
16 g with frequency range from 40 to 500 Hz and
maximum shifting 0,75 mm (peak -to- peak)
4.11 SimNet
Maximum number of products connected in a network: ..........50
Maximum cable length: .......................................150 m (500’)
Bit rate of the bus:..........................................250 Kbit/second
Maximum DC current through a single SimNet plug................5A
SimNet power supply: ..................................................12VDC
Maximum drop cable length:..................................... 6 m (20’)
Maximum total length of all drop cables (accumulated): 60 m (200’)
Environmental protection: Cable and plug/connector system IP66
Maximum temperature:.....................................70 °C (158 °F)
4.12 IP protection
Each part of a Simrad autopilot system has a two digits
IP protection code.
The IP rating is a method to classify the degree of
protection against solid objects, water ingress and impact
afforded by electrical equipment and enclosures. The
system is recognized in most European countries and is
set out in a number of British and European standards.
The first code number describes the protection against
solid objects, and the second number describes the
protection against liquids.

Other manuals for Simrad AP28

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Simrad AP28 and is the answer not in the manual?

Simrad AP28 Specifications

General IconGeneral
BrandSimrad
ModelAP28
CategoryAutopilot System
LanguageEnglish

Related product manuals