6 | System description
1.3 Software record
Control units
When the system is switched on, a status display shows
the serial number and software version for the control
unit.
The shown readout is only an example!
Autopilot computers
Serial number and software version for autopilot
computers and other SimNet sources can be found under
the control unit User setup menu. Refer to Manual source
selection in the autopilot operator manual.
1.4 Exchange of software program
For upgrading the software of Simrad products/devices,
refer to Manual for Software Upgrade Tool, part no.
20222956.
To Next Page
Loading...
Need help?
General
