Simrad AP70 MK2 User Manual

In a Master system command can be transferred to a remote unit either by opening the
system for remote operation from the Master unit, or by requesting command from one of
the remote units.
Ú
Note: You can at any time return to control from the Master station by pressing the
Command key on one of the units in the master station.
Opening a Master system for operation from a remote unit
1. Press the Command key on the Master unit
2. Accept the command request on the master unit
- The system will now be open and command can be taken from any station
3. Take command on the selected remote by pressing the Command key
- Command will be transferred to this remote, accompanied by a 2 second sound
-
All other remote units will return to locked status
Taking command from a locked unit in a Master system
1. Press the Command key on the locked unit
- A dialog will be shown on the unit requesting command (A)
- A command request dialog will be shown on the master unit (B)
2. Accept the command request on the master unit
- The requesting unit will now be opened for command transfer. Other units will remain
locked
3. Press the Command key on the unit requesting command
- Command will be transferred to this unit, accompanied by a 2 seconds sound
Delegation of control in multiple station systems | AP70 MK2 Operator Manual
19

Simrad AP70 MK2 Specifications

General

Brand	Simrad
Model	AP70 MK2
Category	Marine Equipment
Language	English