Simrad AP70 Installation Manual

| 67
Installation checklist | AP70/AP80 Installation manual
Installation settings
Drives
Setting AC70 SD80 AD80
Configure
Instance
Name (product info method)
Drive type
Drive location alongside
Drive location athwartships
Drive control method
Nominal drive voltage N/A N/A
Drive engage N/A
Rudder feedback
Rudder feedback calibration
Advanced
Min rudder
Deadband mode
Rudder deadband
Thruster Response delay N/A
Thruster hysteresis N/A N/A
Thruster operation N/A N/A
Mode select N/A
Handshake 1 N/A
Handshake 2 N/A
Dither frequency N/A N/A
Dither amplitude N/A N/A
Max output port N/A
Max output stbd N/A
Rudder zero N/A N/A
Zero output N/A
Min output
Max output N/A
Remote FU/DP N/A
Remote FU/DP calibrate N/A
Boat
Setting
Dockside boat
Boat type
Boat length
Cruising speed
Transition speed
Thruster inhibit speed
Low speed limit
Init rudder

Simrad AP70 Specifications

General

Type	Autopilot Control Unit
Power Supply	12/24 V DC
Operating Temperature	-15°C to +55°C
Waterproof Rating	IPx6
Interface	NMEA 0183, NMEA 2000
Operating Voltage	12/24 V DC
Water Resistance	IPx6
Display	LCD
Control Modes	Auto, Nav, Wind
Storage Temperature	-25°C to +70°C