Simrad AP70 - Page 76

76 |
Specications | AP70/AP80 Installation manual
SI80 AC70 SD80 AD80
Programmable
handshake output, 2
ports (Steering gear/
thruster interface,
Alarm panel,Watch
alarm, Remote FU/DP
acknowledge)
N/A N/A
Internal open/close polarity
independent solid state contact,
galvanic isolated, max load
100 mA, 2 V DC
Programmable
handshake input, 2
ports (Steering gear/
thruster interface,
Alarm panel, Pulse
log, Pendulum ferry,
Mains steering wheel
override, remote FU/
DP request)
N/A N/A
External open/close contact,
contact current max 30 mA
External alarm output
for buzzer/relay
N/A
Max 100 mA,
voltage level as
local supply
N/A N/A
EVC (Electronic Vessel
Control) interface
N/A
CAN via SG05
Gateway
CAN via SG05 Gateway