Simrad AP80 Operation Manual

44 |
Menu overview | AP70/AP80 Operator Manual
Menu overview
The Quick menus
The Quick menus are mode dependant, displayed by pressing the MENU key.
The menus containing the most common used settings for the active mode. Each Quick
menu have access to the Settings menus.
The Quick menus are described in the “The operational modes” on page 17.
Quick menu in Manual modes
From the Quick menu for STBY, NFU and FU you can change sources used for steering, you
can display active alarms and set manual speed.
Sources
Alarms
Speed (Adjust)
Settings
Auto Select
Steering compass
Monitor compass
Navigation
Position
Position backup
Boat speed
Boat speed backup
Depth
Apparent wind
Calculated wind
Pilot computer
Pilot computer backup
Group
Advanced
nnn
Simrad / None
Data Source
Selection
LEVEL 1 LEVEL 2 LEVEL 3 LEVEL 4
(List of active alarms)
(Settings dialog/menus)
Quick menu in Automatic and navigational modes
Steering performance in automatic and navigational modes might be adjusted from the
mode’s Quick menu.
The diff erent settings are described in “Controlling steering performance in automatic and
navigational modes” on page 28.
Auto mode
Rudder (Adj.)
Ctr.rudder (Adj.)
Speed (Adj.)
Settings
LEVEL 1
(Settings dialog/menus)
8

Simrad AP80 Specifications

General

Brand	Simrad
Model	AP80
Category	Marine Equipment
Language	English