Simrad CE34 ChartSounder User Manual

◄
GOTO
Water Compass Waypoi
PLOT
►
Apparent wind input:
Group selection: SIMRAD
Source (none available):
NONE
Calculated true wind input:
Group selection: SIMRAD
Source (none available):
NONE
MENU
Exit Accept
ENT
∆
∆
Wind
◄
GOTO
Navigation Water
PLOT
►
Input:
Group selection: SIMRAD
Source (one available):
Simrad RC35 ,Sn:000035
Use COG as internal heading: NO
MENU
Exit Accept
ENT
∆
∆
Compass
Chapter 8-14 CE34/44/54 Setup menu
PLOT
Go to Compass interface - step back with [GOTO]
Source - indicates that there is one source available: Simrad RC35.
Use COG as internal heading - if no compass is connected, you
can use the course (COG) from the built-in GPS module by changing
NO to YES.
 When using the GPS course as replacement for heading input, the
accuracy will be reduced in relation to speed, wind and current.
PLOT
Go to Wind interface - step back with [GOTO]
Source - will indicate how many units are connected and available.

Simrad CE34 ChartSounder Specifications

General

Brand	Simrad
Model	CE34 ChartSounder
Category	Marine Equipment
Language	English