Simrad EQ33 - 7.2 Interface Setup, NMEA

Chapter 7-4 EQ33 Setup menu
7.2 Interface setup, NMEA
The next pages indicate the default settings for the interface setups.
After the interface setups will follow a description of the input and
output sentences available in the setups.
MENU
Call up the menu bar, and...
5,2
load NMEA interface
PAGE
Toggle between the two pages of sentences
-refer to 7.2.1 default settings and 7.2.2 description of sentences
+/-
Toggle between INPUT and OUTPUT
Go to any sentence you want to change
+/-
Toggle between values, and between ON and OFF
ENT
Confirm entry, and accept warning (press [ENT] again), or...
MENU
exit function without making any changes