Simrad EQ33 - Page 72

Index EQ33 Echosounder
Installation - continued,
- DS33 9-5
- Operation of DS33 9-5
- location for display unit 9-4
- notes 9-1
- sources of noise 9-12
- transducers (optional) 9-8
Interface setup, alarm output 7-7
Interface setup, NMEA 7-4
- default sentences 7-5
- description of sentences 7-6
- return to NMEA presets 7-12
Interface software version 7-2
Introduction 1-1
Key functions 2-3
-dedicated function keys 1-3
Key symbols in manual 1-2
Language 2-6,7-2
Light & contrast 2-6
Local time and date 3-1
Log 3-1
- reset 3-2
- speed calibration 7-1,A-2
- speed sensor 7-1
Loran C 7-9
- list of Loran C chains 7-9
Maintenance 9-13
Master reset 7-12
Measurement units A-2
- setup 7-1
Menu bar 2-4
Menu layout 2-5
Miscellaneous menu 6-1
Navigation setup 4-1
Night display 7-10
NMEA interface 7-4
- return to NMEA presets 7-12
Page system 2-1
- preset pages 2-2
- rotation inverval 7-2
Palette setup 7-10
Parts of an echosounder 8-1
Pilot menu,
- highway display 4-1,4-2
Position
- display 3-1
- menu 3-1
- status 3-1
Power off 2-6
Power on 2-6
Repair and service 9-13
Safety summary 1-2
Serial number 7-2
Setup menu 7-1
Show test display 7-12
Software version 7-1
Specifications 9-15
Speed,
- over ground 3-1,4-2
- setup 7-1
- through water 3-1
Transducer beamwidth 8-3
Troubleshooting 9-14
Warranty end of manual
Wind display 6-1
- setup 6-2
- wind direction 6-1
- wind relative to the vessel 6-1
- wind speed, relative or true 6-1
XTE - cross-track-error 4-1,4-2,A-4