Simrad GC80 Compact Gyro - Compact Control Unit

Simrad GC80/GC85 Compact Gyro Compass
90 20221511 / D
11.1 Compact control unit
Three different boards in the Compact control unit have jumpers
and/or dip switches that may be used for configuring the
GC80/85 system.
Only a few of these jumpers/dip switches are used in installation
and pre-running procedure for the gyro compass. Refer Jumper
settings in Compact Control unit, page 39, and Dip-switch and
jumper settings, page 42.
The following pages includes drawings showing location of
jumpers and/or dip switches, together with a short description
for the different settings.
TB1
TB3 TB4
1
6
S1
S2
S3
TB2
F7
F9
F6
TB3
F8
F1
F2
F3
F4
F5
IOPT
BOARD
ICIF
BOARD
ITERM
BOARD