Need help?Do you have a question about the Simrad GC80 EXPANDED and is the answer not in the manual?
Details the procedure for starting up and shutting down the gyro compass system.
Describes alarm display, acknowledgment procedures, and handling alarm situations.
Detailed procedure for replacing the sensitive element, including mechanical steps.
Procedure for replacing fuses in the Master Compass and Control Unit.
Procedures for physically mounting the Control Unit and Master Compass units.
Instructions for connecting power and signal cables and setting the power supply voltage.
Step-by-step guide for installing the sensitive element into the master compass.
Procedures for system start-up and configuring gyro system parameters via Extension menu.
Instructions on how to enter and navigate the Extension menu for parameter adjustment.
Detailed table of parameters within the Extension menu's main categories.
Explains how alarm codes are displayed, what they indicate, and how alarms are generated.
Overview of common faults, symptoms, and operator-correctable actions for system issues.
A comprehensive list of alarm codes, their detailed codes, and possible causes.
To Next Page
General
