PAGE | 20
4
mounting template.
5 Remove the mounting template .
6 Apply the supplied Tef-Gel
®
anti-corrosion gel to the four feet of the pedestal.
7 Lift the pedestal using the supplied lifting strap.
⚠ Warning: Do not lift the pedestal with the antenna attached.
8 Lower the pedestal carefully so its mounting holes align with the drilled holes in the vessel.
9
¼ Note: If you are installing the pedestal onto a steel surface, also use the supplied plastic isolating
washers.
10 Apply the Tef-Gel
®
anti-corrosion gel to the threads of each bolt.
To Next Page
Loading...
