PAGE | 34
The RI-50 can be connected directly to any Simrad
®
-compatible multi-function display or to a
1
3
2
5
6
1
HALO radar pedestal and antenna
2
RI-50 radar interface module
3
Compatible multi-function displays
4
NEP-2 or device with a built-in Ethernet switch
5
Ethernet adapter
6
Additional radar functions
GPS position and heading data at 10 Hz or better. The GPS antenna must be mounted in a position
A quality 10 Hz compass such as the Precision 9 is suitable for heading, however for the very best
performance, a GPS compass such as Simrad
®
HS75 or HS80A should be considered.
The connected multi-function display sends NMEA 2000
®
position and heading data to the radar via
the Ethernet connection.
®
GS25 is suitable,
heading output.
To Next Page
Loading...
