PAGE | 24
2
waveguide.
3 Apply the supplied Tef-Gel
®
anti-corrosion gel to the entire length of each of the four antenna
studs.
¼ Note: If black, isolating washers are factory tted at the top of the antenna studs, do not remove.
4 Carefully lower the antenna on to the pedestal.
¼ Note: The antenna can only t one way.
5
studs.
¼ Note: If black, isolating washers are factory tted on the underside of the stud holes, do not
remove.
To Next Page
Loading...
