Simrad Maris ECDIS900 - Page 13

Security
ACCESS
The two workstations are used for navigation purpose only and no other application can
interfere with ECDIS, except for approved applications and
Application Manager
. The
workstations are connected by a point to point Ethernet connection and are not a part of the
ship’s network. Therefore no access from outside of the ship is possible. But the MBA
Application can be connected to email using a Router, configured as Firewall in order to
allow only email protocol in “Email Mode”.
SOFTWARE MODULES
Following the list of the software modules necessary to run ECDIS:
Name Version Description
C:/Program files/MARIS/
ECDIS900_4/bin/ ECDIS900.exe
for Windows 7
C:/Program files(x86)/MARIS/
ECDIS900_4/bin/ ECDIS900.exe
4.7
ECDIS application.
Chart display and route and
logbook management
C:/Program files/MARIS/ECDIS_4/
bin/ Notepad.exe
The current
version
from the OS
application
Utility used to display and
print the logbook and the
route planning.
C:/Program
files/MARIS/ECDIS900_4/
Sensor_Monitor/SMonitor.exe
3.7
Application in charge of
management of the I/O.
DLLS AND OTHER NECESSARY FILES
C:/PROGRAM FILES/MARIS/ECDIS900_4/SENSOR_MONITOR
13