General
Input Output
GENERAL
IEC 61162-1 COMPLIANCE STATEMENT
ECDIS900 digital interfaces meet all requirements of IEC 61162-1.
Sensor Monitor is the application, which manages the I/O for ECDIS.
Sensor Monitor is automatically launched when the system starts and runs in parallel with
ECDIS. With Sensor Monitor, the user selects the type of communication (Serial or Network),
configures the input media, checks the input and the communication status, selects the
Master parameters and eventually route data to other receivers.
To bring to front Sensors_Monitor, click on the icon Switch to SMonitor in the tool bar .
Hardware a and connections are described in the paragraphs Hardware and Connections.
To customise the I/O according to the sensors connected to the PC, the technician must
create new sensors and adjust
To Next Page
Loading...
