Simrad Maris ECDIS900 - Settings

Settings
The Configuration dialogue is used to:
• Modify the communication and sensor
settings
• List the input messages
automatically selected
• To access advanced functions to eventually adjust the selection of input messages.
•
Check the communication
with the terminal window and the serial status.
REMARK: Sensor Monitor can accept the same data type from different sensors but only the
data master is used in ECDIS.
SETTINGS
• Media type: select between serial port of Network with the pop up menu
• Sensor ID: press the arrow and enter a proper name for the sensor.
• Norm: select the type of norm used for the communication with the sensor.
• Parameters: adjust the parameters Port number, baud rate, parity, stop bits for serial
interface or the socket port for LAN communication.
25