General
Application Manager
GENERAL
Application Manager is the special software which works as Shell on the computers.
Application Manager is well specialized for the tasks. At the same time, Application Manager
gives the administrator the minimal set of required system functions in order to restrict access
to the system.
The application runs in two modes:
• Full access mode
•
APPROVAL MODE
ECDIS computer access is restricted to necessary function for ECDIS and others
delivered applications allowed after configuration.
In this mode, it replaces Windows Explorer and takes some important functions which
improve the reliability of the software.
In Approval Mode all standard shortcuts except some of them which are used in the
applications are unavailable. Ctrl-Alt-Del is disabled too.
Reboots, locks or switches off PC if necessary
VIEW AND ADMINISTRATOR LEVEL MODES
VIEWS MODES
Application Manager can work in two different view mode:
• Iconic (collapsed Small Square or Thin Bar on the right )
• Full (bar window).
Application Manager can run in 2 security level mode :
• Operational mode (restricted access)
• Administrator mode ( full access)
Views modes
APPLICATION MANAGER ICONIC VIEW
DISPLAY
Iconic view is normal state of the program.
2 iconic representation are available (option available during installation):
47
To Next Page
Loading...
