Settings
MEDIA TYPE
• Serial communication: Select the COM port and parameters
• Network: data are read and sent to selected UDP ports. In general case, input and output
ports are different. Reading can be optionally filtered by sender IP address. Writing can be
sent broadcast, multicast, locally or to the certain IP address.
• File, Internet, NC Node Manager: Use only by technician
• Modbus: Modbus is a protocol used for communication with complicated hardware such
as programming logic controllers. SMonitor can work with Modbus only by TCP.
Settings:Remote host IP
DATA ROUTING
Data received on a selected serial port can be routed on the Network to a specified IP Port.
This advanced function allows other applications to use the same raw data received on the
serial port.
26
To Next Page
Loading...
