Maintenance
RESTORE ECDIS
ECDIS is delivered with restore facilities, i.e. it is possible to restore the hard disk, as it was
when the system has been delivered. A CD called Ghost is part of the delivery.
To restore completely the system do the following:
1. Shut down the computer.
2. Insert the CD.
3. Switch on the computer. The system boots from the CD.
4. Click 2 times OK in the presentation dialogues.
5. In the menu select Local -> Disk -> From image.
6. Select CD drive in the following dialogue and press Open.
7. Confirm by pressing OK.
Once the hard disk has been restored, insert the ECDIS installer disk and run the set up
software to reinstall the latest version of ECDIS. Then reinstall the charts with the appropriate
CDs and copy the routes backed up on a memory stick.
The hard disk will be reconfigured with the default settings:
IMPORTANT
HDD sharing:
C drive should not be shared.
C:\\Chart – shared with full access for everyone.
C:\\ECDIS_UserData – shared with full access for everyone
C:\\ECDIS_UserData \Routes – shared with full access for everyone
SETTINGS
ECDIS runs automatically at boot with login Administrator, password admin.
USER ACCOUNTS
Administrator. No password.
Guest. No password
STANDARD CMOS SETUP
Halt on: All but Keyboard.
16
To Next Page
Loading...
