Master and Slave modes
LOCAL OR BROADCASTING MODE
Sensor Monitor may be used either in local mode or in broadcast mode.
Local mode means that data acquired by Sensor Monitor are used locally.
In broadcasting mode data are sent on the LAN to be shared with all ECDIS installed on LAN.
REMARK
The Local mode is set automatically by Sensor Monitor when it detects that there is not
network connection or a failure in the LAN connection.
EXPERT MODE
SMonitor can work in two different levels: Basic mode and Expert. To switch from one level to
the other, double right click in the grey area in the main window.
Basic mode with area to click for switching the mode
Switching dialogue box
29
To Next Page
Loading...
