22
|
Cleaning and maintenance | MO Series User Manual
Replacing the lters
Where displays are installed in an unsealed enclosure, air intake lters should be inspected
yearly, and replaced if noticably fouled. If vessel is subject to major works involving spray
painting or sanding, it is recommended that the monitor either be removed, or completely
covered in a clean fabric drop cloth.
¼ Note: MO24 models require ve lter elements, whereas the MO16 and MO19 require three.
The lter accessory kit includes ve elements, to cover requirement for all models.
Other maintenance
Only qualied service personnel should perform any repairs that require opening of the case.
Warning: Some components in the display unit operate on high voltages. Repairs
require specialized service procedures and tools only available to service technicians - there
are no user serviceable parts or adjustments. The operator should never remove the display
unit cover or attempt to service the equipment. Any attempt to do so may make the
warranty invalid.
To Next Page
Loading...
Need help?
General
