A setting of 0 (zero) causes the depth displayed to be the distance from the transducer to the
bottom.
Installation
Used for defining Echosounder sources available for selection in the Source menu option. For
information about defining sources, refer to the separate NSS evo3 Installation manual. For
information about Source selection, refer to "Source" on page 77.
ForwardScan Installation
Used for ForwardScan installation and setup. Refer to the "ForwardScan setup" on page 92.
82
Echosounder | NSS evo3 Operator Manual
To Next Page
Loading...
Need help?
General
