Sinar Sinarback eMotion 75LV - 3 First Starting of the Capture Software

____________________________________________________________________________________________________________________________
Operating Instructions Sinarback eMotion 75 LV / 75 / 54 LV 6
3 First Starting of the Capture Software
This paragraph describes the first starting of the user software Sinar CaptureShop
TM
and Sinar eXposure™, re-
spectively.
The following steps are only necessary when you wish to operate your Sinarback eMotion 75 LV / 75 / 54 LV
for the first time with the Sinar CaptureShop
TM
or with the Sinar eXposure™ capture software and when the
reference file is not being transmitted automatically from the internal memory to the computer.
Place the included CD-ROM with the camera data (CCD Files) in the CD-ROM drive. This CD contains camera-
specific data that are needed for starting the software for the first time.
Start Sinar CaptureShop™ 5.4 or higher or the Sinar eXposure™ 6.1 or higher by double-clicking on the re-
spective program icon. Depending on the firmware that is being used in the Sinarback eMotion 75 LV / 75 /
54 LV, an information window will appear that will automatically copy the corresponding data from the CD in
the drive. This installation will be completed in a few seconds and then the CD will no longer be needed, so
that it can be removed.
Important Notice
Please store this CD in a secure place, because it is the Original Reference CD!