____________________________________________________________________________________________________________________________
Operating Instructions Sinarback eMotion 75 LV / 75 / 54 LV 15
7 Transferring Images to the Computer
7.1 Tethered Operation
a. In order to save the images that will be taken with your Sinarback eMotion directly onto the computer,
the digital back must first be connected with the computer by means of the Firewire cable that is in-
cluded in the scope of delivery.
b. Furthermore, either the capture software Sinar CaptureShop™ or Sinar eXposure™ must be installed on
the computer and started. Both software can be found on the CD included with the digital back.
c. If working with Sinar CaptureShop™:
In the menu "CaptureShop / Hardware Setup", select the camera "Sinar eMotion Generic Camera Interface".
d. If working with Sinar eXposure™:
In the menu "Sinar eXposure / Preferences", select the camera being used.
e. In the capture software you are working with designate a folder in which the images shall be stored.
f. Now the taken images will directly be saved on the hard disk of your computer.
7.2 From the Internal Memory to the Computer
If you would like to take your images without being connected to the computer, you can save your images
onto the internal solid state memory of the Sinarback eMotion as described on chapter 4.2.1. To transfer the
image data from the internal memory to the computer please proceed as follows:
7.2.1 With Sinar CaptureShop™
a. Connect the Sinarback eMotion with the computer by means of the Firewire cable.
b. Start the capture software Sinar CaptureShop™ that was previously installed on the computer. The soft-
ware can be found on the CD included with the digital back.
c. In Sinar CaptureShop™, designate a folder in which the transferred images shall be saved.
– In the menu "Capture" select "Download Images from Internal Memory".
– Now, all thumbnails of the images that are still located in the internal memory of the Sinarback
eMotion are shown. Select the images you wish to transfer to the computer and click on "Download".
– Now the selected images will be saved on the hard disk of your computer.
7.2.2 With Sinar CaptureShop™
a. Connect the Sinarback eMotion with the computer by means of the Firewire cable.
b. Start the capture software Sinar eXposure™ that was previously installed on the computer. The software
can be found on the CD included with the digital back.
To Next Page
Loading...