____________________________________________________________________________________________________________________________
Operating Instructions Sinarback eMotion 75 LV / 75 / 54 LV 9
4.2.3 Sensitivity
The Sinarback eMotion can be set for various sensitivities (ISO speeds). When a camera is being used with
which the Sinarback eMotion can communicate directly without a cable, this sensitivity setting is also trans-
ferred to the medium format camera and the built-in exposure meter takes that setting into account in estab-
lishing the aperture/shutter speed combination. The sensitivities that can be set on the Sinarback eMotion
range from ISO 25 to ISO 800 depending on the model.
4.2.4 Image Mode
The Sinarback eMotion features an internal image compression based on the raw data generated by the digi-
tal back. This function can be switched on and off.
4.2.5 Camera Mode
The Sinarback eMotion can be attached to various camera bodies by means of its dedicated adapters. In order
for the Sinarback eMotion to communicate with the respective medium format camera as efficiently as possi-
ble, please enter the designation of the medium format camera that is being used here. If you plan to work
with a view camera, please enter "X Contact".
4.2.6 Shutter Speed
The Sinarback eMotion has an internal exposure setting function. The latter is only activated when the work is
being performed in the "Master Mode", and it serves for flash synchronization with time exposures. Available
shutter speeds range from 1/60 to 30 seconds.
4.2.7 Sleep Mode
The Sinarback eMotion is equipped with an energy saving mode. Here you can set the period of time after
which the sleep mode is to be activated. This setting establishes the length of time elapsed after the last ex-
posure when the sensor and the screen are switched off.
4.2.8 Date and Time
The Sinarback eMotion is equipped with an internal clock. To set this clock, select the menu item "Time" and
press the OK key. A new dialog will open, with which you can enter the time and the date. To make these
entries, use the familiar arrow keys. To confirm the entries, press the OK key again. To discard the entries,
press the Info/Esc key. The time and date will be filed with every exposure. The time that you have set on the
Sinarback eMotion will only become operational after you have turned the Sinarback off and then on again.
To Next Page
Loading...