____________________________________________________________________________________________________________________________
Operating Instructions Sinarback eMotion 75 LV / 75 / 54 LV 14
6.5 Copying Data
You can copy the pictures in the internal memory or you can move them. When you copy pictures, they will
not be deleted from the internal memory after the copying procedure! When you move the pictures, they will
be deleted from the internal memory after they have been safely transferred to the CF card. There are two
methods available for copying pictures. With Copy Current, the selected image is copied on to the CF card.
With Copy Max., as many pictures as possible will be copied on to the CF card. With this command, the
Sinarback eMotion always starts with the oldest picture stored in the internal memory. You have the same
possibilities for moving the pictures as you do for copying them. With Move Current, you only move the cur-
rently selected picture to the CF card. With Move Max., as many pictures are transferred to the CF card as
there is room for them on the card. Here too, the Sinarback eMotion begins with the oldest picture in the in-
ternal memory.
6.6 Over-exposure Alert
The Sinarback eMotion features an over-exposure alert for efficient control of the exposure. If you wish, you
can switch this alert on or off. When the over-exposure is switched on, areas for which one or more channels
are over-exposed will be highlighted in red.
6.7 Black Reference
From time to time, the Sinarback eMotion applies a black reference in order to enhance the image quality.
When needed, this occurs every 15 minutes, or when you select a shutter speed that is longer than 1 second.
When you wish to apply a black reference at a particular point in time, there is the possibility of activating
the black reference manually. To do so, choose the menu item Blackreference Next Image and activate it
by pressing the OK key. Immediately after the next exposure, the Sinarback eMotion will apply a black refer-
ence. This black reference will be filed together with the respective image. This process will be indicated on
the screen with the alert Acquiring Black Reference.
To Next Page
Loading...