Sinoboom 1323RE - Page 16

© Jun. 2021 1-4 1323RE&1623RE Operation Manual
MACHINE SPECIFICATIONS
Table 1-2 1623RE specifications (continued)
MEASURE
1623RE (METRIC) 5389RE (IMPERIAL)
Up time (no load)
70 s～90 s
Down time (no load)
45 s～55 s
Gradeability 40% (22°)
Max. allowable inclination (front-to-
back)
3°
Max. allowable inclination (side-to-
side, outrigger retracted/extended)
2°/0.8°
Max. outrigger leveling angle (front-
to-back)
7°
Max. outrigger leveling angle (side-
to-side)
12°
Turning radius (inside)
2.2 m 7ft 2.6in
Turning radius (outside)
5.3 m 17ft 4.7in
Max. allowable side force (indoor/
outdoor)
400 N 90 lbf
Max. operating noise 80 dB
POWER
Drive mode (drive×steer) 4WD×2WS
Hydraulic tank capacity 110 L 24 gal (UK)/29 gal (US)
Hydraulic system pressure
24 MPa
3481 Psi
Battery specs (voltage, capacity,
rate of discharge)
48 V, 480 Ah, 5 hr
System voltage
48 VDC
Control voltage 12 VDC
Charger (input voltage/output
current)
100～240 V AC/60 A
Lift motor (Volts/kW)
48 VDC/8 kW
Drive motor (Volts/kW) 29 VAC/3.56 kW
GROUND BEARING INFO
Max. tire load
3900 kg
8598 lb
Tire contact pressure
720 kPa
104 psi
Max. outrigger load 3200 kg
7055 lb
Outrigger contact pressure
630 kPa
91 psi
ENVIRONMENT
Max. allowable wind speed (indoor/
outdoor)
0 /12.5 m/s 0 /28 mph