TRANSPORTING AND LIFTING THE MACHINE
AB10ERJN Operation Manual 8-3 © Jul. 2022
2. Thoroughly inspect the machine for loose or
untightened components and ensure the safety pin
of turntable is locked.
3. Ensure the rope or belt is of sufficient strength.
4. Use at least 4 ropes/belts to fasten the chassis and
1 rope/belt for the platform.
5. Adjust the rigging to prevent damage to the rope/
belt.
6. To protect the boom components and platform load
sensors, do not apply excessive downward force to
the rope/belt fastened near the platform. It is
recommended to add a foam layer beneath the
platform and ensure the platform is suspended.
Figure 8-3
To Next Page
Loading...
