© Jul. 2022 A-6 AB10ERJN Operation Manual
DECALS/NAMEPLATES INSPECTION
Repair & Inspection Report
B-9 Inspect Boom Envelope
Limit Travel Switch
B-10 Inspect Tilt Protection
B-11 Check Drive Reducer Oil
Level
B-12 Check Slewing Reducer
Oil Level
B-13 Inspect Slewing Bearing
Bolts
B-14 Lubricate Slewing
Bearing
B-15 Inspect Platform
Oscillating Cylinder
Fasteners
B-16 Test Cylinder Drift
Checklist C Procedures
Items
YES/Good
Machine
NO/Damaged or
Faulted Machine
REPAIRED/
Repaired
Machine
Problem
Description
C-1 Inspect Weighing System
Checklist D Procedures
Items
YES/Good
Machine
NO/Damaged or
Faulted Machine
REPAIRED/
Repaired
Machine
Problem
Description
D-1 Inspect Boom Wear Pads
D-2 Replace Drive Reducer
Gear Oil
D-3 Replace Hydraulic Oil
User
Inspector Signature
Inspection Date
Inspector Title
Inspector Company
To Next Page
Loading...
