MAINTENANCE
GTJZ0612E&0812E&1012E&1212E Operation Manual 9-3 © Mar. 2022
3. Duplicate the Repair & Inspection Report template
for each inspection. Store the completed forms for
10 years or until the machine is no longer in use or
as required by machine owner/company/custodian.
4. Use the following form to record the results. After
each item is complete, check the appropriate box.
5. If any inspection item is marked as “NO” based on
the inspection results, the machine must be
stopped and re-inspected after repair is completed
and the box marked “REPAIRED” shall be checked.
Select the appropriate inspection procedure based
on the inspection type.
Table 9-3
Repair & Inspection Report
Model
Serial No.
Checklist A Procedures
Items
YES/Machine is
in Good
Condition
NO/Machine Has
Damage or
Malfunction
REPAIRED/
Machine Has
Been Repaired
Problem
Description
A-1 Inspect All Manuals
A-2 Inspect All Decals
A-3 Inspect Damaged, Loose
or Lost Parts
A-4 Inspect Hydraulic Oil
Level
A-5 Inspect Hydraulic Oil
Leakage
A-6 Functional Tests
A-7 Inspect Battery Level
A-8 Perform Maintenance
After 30 Days
Checklist B Procedures
Items
YES/Machine is
in Good
Condition
NO/Machine Has
Damage or
Malfunction
REPAIRED/
Machine Has
Been Repaired
Problem
Description
B-1 Inspect Electric Wires
B-2 Inspect Rim, Tire and
Fasteners
B-3 Inspect Battery
B-4 Inspect Hydraulic Oil
B-5 Inspect Hydraulic Oil
Tank Air Filter
B-6 Inspect Brake Manual
Release Function
B-7 Inspect Emergency
Lowering
To Next Page
Loading...
