GTJZ0612E&0812E&1012E&1212E Operation Manual 10-1 © Mar. 2022
10 DECALS/NAMEPLATES INSPECTION
Use appropriate inspection methods to check that all
decals are easy to identify and properly placed.
Replace any lost or damaged safety decals.
Clean safety decals with neutral soap and water. Do not
use solvent-based cleaners, which can damage safety
label materials.
Do not operate machines without decals/nameplates.
UNSAFE OPERATION HAZARD
All safety labels must be legible to
alert personnel of safety hazards. Re-
place any illegible or missing labels
immediately. Safety labels removed
during any repair work must be re-
placed in their original position be-
fore the engine is placed back into
service. Do not operate the engine if
there are missing or badly worn
safety labels.
To Next Page
Loading...
