Sirona PerioScan - Learning Program and Demo Mode

15 Key combinations Sirona Dental Systems GmbH
Operating Instructions PerioScan
61 95 825 D 3496
44 D 3496.201.03.05.02
Learning program By pressing the function key for longer than 3 sec,
the learning program will be activated. The user can now
directly probe on enamel in the patient‘s mouth and will
get the following notes regarding his probing pressure:
No display = pressure too low
Green display = right pressure (30 - 70 g)
Blue display = pressure too high
The software can be deactivated by pressing the func-
tion key or by pressing the foot switch
Demonstration mode for sales reps By simultaneously pressing the "fresh water" and
"PERIO 3" the demonstration mode can be activated.
By pressing the key combinations again or by pressing
the foot switch this mode can be deactivated.
1
1
1