Siruba PK511 - Page 4

SiMUaA ® Sew Reach
Introduction
CAUTION BEFORE OPERATION
- A WARNING:
~ To avoid malfunction and damage of the machine, confirm the following.
• Use
the oll adaptable to the machine specifications.
• Clean the sewing machine thoroughly before using
It for the first time .
• Remove all
dust collected on the sewing machine during the transportation.
• Confirm that
the voltage and phase are correct.
• Confirm
that the power plug is properly connected.
•
Never use the sewing machine in the state where the voltage type Is different from the
designated one .
• The direction
of rotation of the sewing machine Is clockwise as observed from the handwheel
side. Be careful
not to rotate it in reverse direction.
•
Before applying power , release the stop-motion mechanism and turn by hand the needle
driving pulley in order to ensure that the machine Is in order.
• To Install
the machine, the frame support bar has to be firstly inserted into the table.
• When operating
the sewing machine, turn ON the power switch after properly setting the head
on the table.
• Operate
the handwheel after the sewing machine has totally stopped.
P03
From the library of Superior Sewing Machine & Supply LLC • www.supsew.com